|
1951 Chevy Accessories Installation Manual |
||||
 |
||||
|
|
||||
|
Figure 62 |
||||
|
|
||||
|
5. |
in
section AA, figure 60, and tighten securely-
Remove the two front bumper arm
bolts and nuts at the front of the
frame horn and assemble
the bar braces through the 1-3/4 inch holes in filler panel. Attach bar
braces to frame horn with
bolts furnished, using nuts and washers which were removed
previously, as shown in figure
61. Attach bar braces to grille
guard bar assembly with bolts,
nuts and washers furnished as shown in section BB, figure 60. Insert rubber
grommets in filler panel and tighten all bolts and nuts securely. Remove license bracket from right side
of |
filler
panel and measure from left side of center upright bumper guard 9-1/8 inches
to the left. Center bracket and
drill two 9/32 inch holes and attach bracket and license holder as shown in section CC, figure
60.
Approximate Flat Rate Time 1
hour. |
||
|
986536 RADIATOR GRILLE GUARD - TRUCK
Procedure
for Installation of Radiator Grille Guard on 4000-5000-6000 Model
Trucks. |
||||
|
|
||||
 |
||||
|
|
||||
|
Figure 63 |
||||
|
|
||||
|
23 |
||||
|
|
||||
| « PREVIOUS PAGE | CONTENTS PAGE | NEXT PAGE » |
|
|