1951 Chevy Accessories Installation Manual

tmp1B2-1.jpg
5. Cut slot in seat cover as shown in Figure 21 and replace robe cord and ash tray.
tmp1B2-2.jpg
Figure 19
4. Place spring clips on back of back rest at lower edge of seat as shown in Figure 20.
Figure 21 FRONT SEAT CUSHION
Place two 20 inch spring wires in seat cush­ion cover, place four "S" hooks in opening in cover and close "S" hooks with pliers. Place "S" in seat frame as shown in Fig­ure 22.
Line up seat cover seams to contour of seat cushion and hog ring front edge of cover to seat frame as shown in Figure 23. Use spring clips as shown in Figure 24 to fasten seat cover to side panels.
tmp1B2-3.jpg
Figure 20
tmp1B2-4.jpg
Figure 22
10