1951 Chevy Accessories Installation Manual

the cover. Cover is designed to spring into correct position when installed.
4.    Remove cover and drill 1/4 inch holes at points scribed in body opening flange.
5.    Install guides being sure to pull down screws so that screw heads will pull into body metal. (See figure 151.)
6.    Place cover in opening and move lock lever "D" to locked position.
Repeat operation for opposite side of car. Approximate Flat Rate Time 1 hour.
986487 ASH TRAY
Procedure for Installing Ash Tray on All Model Passenger Cars.
Figure 154
Figure 152
Figure 153 64