1951 Chevy Accessories Installation Manual

CAUTION: After drilling is completed, un­screw bracket from post, discard paper Template, and clean away shavings, burrs, etc.
Mounting Light
5. First, Handle Unit "E" must be detached from Lamp. Follow figure 167 closely: Loosen
locating screw "A," remove bolt "G" at bottom of Handle "C." and remove Handle, being careful not to lose the Spring Washer. Remove Pinion "D" by pushing up from bot­tom side (where Handle was removed). Com­pletely remove screw "A." Handle Unit "D" may now be detached by pulling it off shaft. DO NOT DISMANTLE THE LAMP ANY FURTHER.
Figure 167
Figure 169
Figure 168