1951 Chevy Accessories Installation Manual

tmp2F8-1.jpg
Figure 47
4.    Move and align dispenser so that it appears in position as shown in figure 48.
5.    With left-hand bracket of tissue dispenser as a template drill 167/169 diameter hole in lower flange of instrument panel.
6.    Fasten left-hand bracket with screw fur­nished.
7.    With tissue dispenser mounted proceed un­derneath to center support bracket of tissue dispenser, (see figure 49).
8.    Using hole in center support bracket as a guide take a sharp object and pierce through cardboard of glove box.
9.    Place "U" type anchor nut over end of cen­ter support bracket. Make sure anchor nut is aligned with hole in bracket, (figure 49).
10.  Open glove box door and take screw and plain washer furnished and put through hole that was pierced through cardboard of glove box.
11.  After making sure screw is aligned to go into anchor nut mounted on center support bracket of tissue dispenser, take a short screw driver and tighten securely from in­side of glove box, (figure 49).
tmp2F8-2.jpg
Figure 48
18