1951 Chevy Accessories Installation Manual

through hole in door. Fasten Bracket "B" to door with oval head sheet metal screws. AGAIN, care should be taken to tighten each screw only a little at a time until both are tight, thus keeping the Bracket from creep­ing and the Shaft from binding.
Slip Friction Bracket "J" over Shaft "F." Use rubber spacer between Friction Brack­et and Door on convertible models only. Remove string or rubber band from Racks. Rotate Friction Bracket "J" to fit flat against inside door moulding {see figure 169). Center
Figure 171