What’s a prototype?
1951 How it all began
1952 Corvette EX-122
1954 Corvette Corvair Motorama showcar
1954 Corvette Hardtop Motorama Showcar
1954 Corvette Nomad Motorama Showcar
1955 Corvette Biscayne Show Car
1956 Harlow Curtis SR-2 Lookalike
1956 Corvette Impala Show Car
1956 Corvette SR-2 Sebring Racer
1952 EX-122 Concept Car
1957 Q Corvette
1957 Corvette SS Show Car
1957 Corvette SS XP-64
1958 XP-700
1959 Stingray Racer XP-87
1959 Corvette Stingray
1961 Corvette Mako Shark XP-755
1962 C2 Prototype XP-720
1962 Four Seat Stingray Corvette XP-720 2+2
1963 Corvette Rondine Pininfarina Coupe
1963 Corvette Grand Sport
1963 Wedge Corvette Split Windshield
1964 World’s Fair Styling Study
1964 Clay model for '66 update
1964 Grand Sport GS-II(b)
1964 CERV II
1964 Pontiac Banshee XP-833
1964 Corvette XP-819 Rear Engine
1965 Corvette Mako Shark XP-830
1966 Mid Engine Styling Proposal
1967 Astro I
1968 Corvette Astro-Vette
1968 Astro II-XP-880 mid engine
1969 Astro III
1969 Manta Ray
1969 Mid Engine XP-882
1970 Scirocco Showcar
1970 Corvette XP-882
1973 Corvette 2 rotor XP-897-GT
1973 Reynolds XP-895
1973 Corvette 4 rotor XP-882
1973 Corvette XP-898
1974 Mulsanne Showcar
1976 Corvette XP-882
1979 Turbo Corvette
1978 Corvette Astro-Vette
1980 Turbo Corvette
1982 4th Generation Concepts
1984 Bertone Ramarro
1985 Corvette Indy
1986 GTP Corvette
1987 Corvette Geneve
1989 Corvette DR-1
1989 Corvette ZR-2
1990 Corvette Conan ZR-12 V12
1990 Bertone Nivola
1991 ZR-1 Snake Skinner
1992 Stingray III
2001 Corvette Tiger Shark
2003 Corvette Italdesign Moray
2009 Sideswipe

1957 Corvette SS XP-64

Led by the gifted Zora Arkus-Duntov, a team of engineers created this ultra-lightweight racecar: 1850 lbs, approx. 950 lbs. less than the 1957 production Corvette. The car had a 283ci iron block with aluminum cilinder heads and Ramjet fuel injection that produced 307 bhp.

Duntov convinced Harley Earl that a race car based on the stock Corvette did not stand a chance against the Ferraris and Maseratis at Sebring. GM would have to develop a purpose built racer. On July of 1956, work begins on Project XP-64, a sports/racer built for the upcoming race in Sebring. The car is named the Corvette SS (Super Spyder), or Sebring SS. A clay model of Zora's design is made, and shown to management.

The SS was developed in only six months. In 1958, after it’s racing career ended, the car was clocked at over 183 mph! Success at Sebring for this stunning racer was unfortunately not in the cards. Although the SS was extremely fast for its day, a series of mechanical problems forced it to retire after 23 laps in the 1957 Sebring 12-Hour race. Shortly thereafter, the ban on factory-sponsored racing efforts by the Detroit manufacturers spelled the end of the SS project.

An SS chassis was restyled in 1959 by Bill Mitchell, then GM Vice President in charge of Styling, who turned it into the Stingray Racer.

The Corvette SS (XP-64) began life as an experimental race car, and was unveiled to the public at the 12 Hours of Sebring endurance race on March 23, 1957. The SS was in training for Chevrolet’s debut at LeMans that year. The Sebring race was, in many ways, Chevrolet’s inauguration into modern racing. But the SS never finished the race, much to the dismay of the racing community. Soon after Sebring, the (AMA) Automobile Manufacturer’s Association banned manufacturer-sponsored racing, and the SS was relegated to test track duty. Custom-built by the Chevrolet Engineering Center under the direction of Zora Arkus-Duntov, the SS featured a lightweight magnesium alloy body, and a tubular frame in place of Corvette’s box-rail frame. Also included were a four-speed manual transmission, independent front and four-link rear suspension, the extensive use of aluminum, and a 283 cubic-inch fuel-injected V8 with 300-plus horsepower. The SS was extremely light, having a dry weight of 1,850 lbs. (approx. 950 lbs. less than the 1957 production Corvette). An SS chassis was restyled in 1959 by Bill Mitchell, then GM Vice President in charge of Styling, who turned it into the Stingray Racer.

Years later, the Corvette SS name resurfaced on an engineering prototype built in 1990 – the Corvette ZR-1 SS. Now housed in the National Corvette Museum, the ’90s version of the SS was developed by Chevrolet engineering to test alternative lightweight materials such as magnesium, and their effects on performance. It featured a Dual-Overhead Cam version of the 5.7-liter V8, and produced 425 horsepower and 400 lbs.-ft. torque. At 2,750 lbs. (715 less than a 1990 production ZR-1), the ZR-1 SS maintained the tradition of light weight and high performance.

FINE LINES: 1957 Corvette SS

1957 Corvette SSAs a one-of-a-kind race car and an advanced styling exercise, the SS ultimately fell victim to corporate ideology

© Malcolm Gunn, Wheelbase Communications
(Original publication: March 15, 2007)

There are dreamers and there are racers.

The one thing that history — and the Corvette SS — has taught us, is that mixing the two can be an exhilarating, awe-inspiring . . . and downright frustrating experience.

On looks alone, the stunningly beautiful Corvette ‘Spyder Sport’ should have been a huge success on the race track. However, its designers discovered that dream-car styling was no substitute for careful execution of the mechanical details.

It was a time when Chevrolet was not only interested in going fast, but looking good doing it, an idea that was intended to boost sales. Form over function to certain degree.

The origins of this glitzy, but ultimately doomed experimental racer go back to the mid-1950s when Chevrolet brass began to seriously develop the Corvette as a world-class sports car. Under the direction of Ed Cole and the impassioned encouragement from chief engineer Zora Arkus-Duntov, the underpowered boulevard cruiser began its transformation into a serious performance-oriented import-fighter.

Real-world development of the Corvette meant racing it. In 1955, Arkus-Duntov personally drove a V8-powered prototype to a record-breaking time in the fabled Pike’s Peak hillclimb, a grueling 12.5-mile assault up the side of a Colorado mountain. The following year on the sands of Daytona Beach, Fla., the Corvette established a new benchmark for the flying mile at more than 150 m.p.h. ’Vettes were also entered in the Sebring, Fla., 12-hour endurance race, capturing the first-place prize for their class. Successes at such image-enhancing contests translated into increased showroom activity and led to further development of the sporty coupe, especially in the areas of the engine, suspension and chassis.

The wins also attracted the attention of Harley Earl, then General Motors’ head designer. After Earl’s son, Jerry, purchased a Ferrari to go racing, the understandably shocked and embarrassed father commissioned his stylists to build a special racing ’Vette. The result was the SR-2, a relatively stock-looking machine with the exception of a large D-Type-Jaguar-inspired fin located directly behind the driver’s seat.

The SR-2 ultimately proved to be too much race car for Jerry Earl, but was also too heavy to be competitive, even in the hands of professional drivers. (Shorn of about 300 pounds, the car eventually did manage to establish a record for the standing mile at Daytona Beach.)

By then, the senior Earl had developed a serious case of racing fever. In July of 1956, the all-or-nothing designer commissioned a full-blown race car that could beat the Europeans at their own game.

1957 Corvette SSThe Corvette SS was born.

Much of the car’s basic structure was designed by Arkus-Duntov, who used the tubular space frame of the Mercedes 300SL as his template. In the meantime, Earl’s design studio, again using the D-Type Jag for inspiration, began with the body.

The original fiberglass prototype was dubbed the XP-64. The letters stood for Experimental Pursuit, which the aircraft-loving Earl borrowed from planes that were in the early testing stages. A second car, however, featured a considerably lighter magnesium body that housed a 283 cubic-inch fuel-injected V8 that made 307 horsepower at 6,400 r.p.m.

The finished product left spectators wide-eyed and slack-jawed when it first appeared at The 12 Hours of Sebring. The SS was perfectly finished to the point that it looked far too delicate to perform as an all-out competition car. Its wide grille contained a full row of ‘teeth’, just like a regular production ’57 Corvette, and there was also flashy stainless-steel trim along the sides and across the tail.

The fiberglass test version qualified on the pole, while the lighter-by-400 pounds magnesium car was prepared for the actual race. The reason for this was that Earl was worried about damaging the paint job on the “real” SS.

From the beginning, it was clear there were problems. The metal body retained too much engine heat, which sent cockpit temperatures soaring, and the brakes began to fail. The final straw turned out to be the incorrectly installed rear-suspension bushings, which also failed, causing the back wheels to bang into the inner fenders.

Grand Prix ace Piero Taruffi, who had been specially hired by Chevrolet as one of its drivers, brought the car into the pits, deeming it unfit to finish . . . a little more than an hour into the 12-hour event.

Down, but not out, the team made plans to build three additional cars to compete in France’s famed 24 Hours of Le Mans endurance event. However, the newly agreed-to (at least publicly) competition ban that had the Big Three automakers end official factory support of any type of motorsports, spelled the end for Harley Earl’s dreamy dalliance in the racing world.

Today, the museum-piece SS is occasionally allowed to stretch its legs at various historic revival meetings, showing the world how beauty and brawn once merged and almost — but not quite — created motorsports magic.

© 2011 High Performance Web Sites. All Rights Reserved


Year by Year
Pace Cars

Other HRDU Sites

Hot Rod Events
Hot Rod History
Hot Rod Hall of Fame
Hot Rod Magazines
Hot Rod Books
Hot Rod Tech
Hot Rod Tours
Show Rods
Land Speed Australia
Land Speed America
LSR History
LSR Historians

More HRDU Sites

All About 1934 Chev's
48-53 Chev Pickup's
History of the Corvette
Car Spotters Guide
Monaro Shrine
Aussie Utes


About Hot Rods Down Under
Contact Us
Terms and Conditions
Site Map

Hot Rods Down Under